Series Vents Arc

• Motor type: DC
• Control: Built-in control panel
• Impeller type: Axial
• Motion sensor
• Humidity sensor: Built-in
• Timer: Turn off timer

• Intelligent integrated control functions allow to adjust personal settings for the most balanced microclimate.
• A wide range of operating modes is available for high comfort.
• The unique impeller shape and modern DC motor ensure both extremely quiet operation and high performance.
• The DC motor ensures a low energy consumption level of 2.7 W only, even at maximum speed.
• High water protection level allows for the fan to be installed over the shower.
• Besides, the fan is connected to a DC 12 V power supply, which allows to install it even on yachts and motorhomes.
• Black and white design colors available.

• Specially designed motor on ball bearings and aerodynamically optimized impeller shape provide super silent operation at only 0.9 dBA, and high performance.
• The bearings are maintenance-free and are filled with grease for the whole motor service life.
• The motor is equipped with overheating protection.
• The fan has IP44 ingress protection rating and can be installed in Zone 1 of bathrooms.

Due to replaceable spigots the fan is suitable for mounting with Ø100 or Ø125 mm air ducts.

Ease of use: the motor unit and the impeller can be easily removed with no special tools necessary.

LIGHTING SENSOR The lighting sensor works autonomously. It collects statistical data about the natural indoor light level and is triggered by an abrupt change in the light level. Daily natural light level changes do not trigger the sensor.

HUMIDITY SENSOR Humidity sensor autonomously selects the optimum humidity level for the room in which it is installed. The fan’s operation algorithm is selected based on analyzing the statistical data of the indoor humidity level.

TIMER Turn-on delay timer is set at 30 sec. It is triggered by the lighting sensor or humidity sensor. Turn-off delay timer is set at 15 minutes and is always triggered by a motion, lighting or humidity sensor.

TEMPERATURE SENSOR It is triggered by a change in indoor air temperature when it reaches 28 °С, and turns off at a temperature of 24 °C.

MOTION SENSOR It is triggered by detecting motion within its operational zone.

OPERATION MODES

The Vents Arc fan operation modes can be selected using a multiposition switch on the motor unit.

 

Model range

Lineup Vents Arc	Connected air duct size, mm	Rated power, W	Maximum airflow, m3/h	Sound pressure level LpA at 3 m, dB(A)	Motion sensor	Humidity sensor	Temperature sensor	Timer
Vents Arc White	125/100	2.9	140	28
Vents Arc black	125/100	2.9	140	28