Series Vents Fantom

Fantom centrifugal extract fans for high-resistance air duct systems

Motor type: AC
Impeller type: Centrifugal forward curved blades
Casing material: ABS Plastic
Timer: Turn on timer
Humidity sensor
Motion sensor

Series Vents Fantom mô tả 1

The impeller’s shape ensures low noise and exerts high pressure in long air ducts.
High water ingress protection rating IP45 allows to install the fan in rooms with high humidity.
The back valve prevents drafts from occurring in the room.
The filter can be washed in a dishwasher.

Series Vents Fantom mô tả 3

ADVANTAGES OF THE FAN

Innovation

The centrifugal impeller of unique design exerts high pressure, enabling air to traverse air ducts 8 times longer than the classic axial impeller, and ensures resistance to pressure fluctuations in ventilation systems

Reliability

The motor is equipped with overheating protection and is maintenance-free for the whole motor service life. The fan’s impeller and casing are made of durable high-quality UV-resistant plastic.

Reliability

Multipurpose use

Multipurpose use

The fan is rated for both continuous and interval operation and is maintenance-free. The unit is designed for ceiling and wall mounting.

MODIFICATIONS

Models of this series can be equipped with extra options:

The fan is equipped with a turn-on delay timer (1, 2 or 5 minutes), turn-off delay timer (5, 15 or 30 minutes) and an interval timer (30 minutes every 4 hours). Upon turning on a switch – for example, a lighting switch – the fan switches to a higher speed in the time preset by the turn-off delay timer. When the interval timer is activated, the fan speed is maximized for 30 min. every 4 hours.

The fan is equipped with a turn-on delay timer (1, 2 or 5 minutes), turn-off delay timer (5, 15 or 30 minutes) an interval timer (30 minutes every 4 hours) and a humidity sensor.

The humidity sensor has 2 modes of operation.

Manual mode allows to set the humidity level in the range of 60 %, 70%, 80 % and 90%. If this threshold is exceeded, the fan is turned on, or switched to a higher speed.
Auto – intelligent humidity control. This mode provides for humidity level change in automatic mode. The fan autonomously selects the optimum humidity level for the room, in which it is installed. The choice of the fan operation algorithm is determined based on analyzing the indoor air hymidity level statistics.

The fan is equipped with a turn-on delay timer (1, 2 or 5 minutes), turn-off delay timer (5, 15 or 30 minutes) an interval timer (30 minutes every 4 hours) and a microwave motion sensor operating through the front panel. If the motion sensor is triggered, the fan switches to a higher speed in the time preset by the turn-off delay timer. When motion is no longer detected, the fan continues to work at a high speed during the time preset by the turn-off delay timer.